Sometimes after washing there may be some washing powder left in the tray.
However, it is important to clean the powder compartment thoroughly, otherwise powder-lime deposits may form.
And this, in turn, will have a negative impact on the quality of washing and the operation of the device.
Possible reasons
Insufficient care may result in powder remaining in the tray.
Also, the appearance of limescale deposits can be caused by water that is too hard.
It is also important to pay attention to the quality of the powder. Firstly, low-quality products do not cope with dirt.
In addition, they may not dissolve well in water, clogging the tray.
Powder will also remain in the compartment if you pour too much of it.
Therefore, it is advisable to follow the manufacturer's instructions so as not to miscalculate the correct amount of cleaning agent.
If the powder remains in the tray, this may also indicate some malfunctions of the equipment.
How to remove powdery limescale deposits
To remove such growths, you can use an effective remedy.
2 tablespoons of laundry soap shavings should be mixed with 3 tablespoons of soda.
Then add 4 tablespoons of hydrogen peroxide. We treat the tray from the inside with this product and leave it for 30 minutes.
Then we clean with a brush, rinse and dry thoroughly.
Previously we talked about how to use washing capsules.
