Washing a jacket with synthetic or natural filling can be a real challenge.
The lumps that form after washing spoil the appearance and reduce the thermal insulation properties of the product.
To avoid these problems and maintain the original appearance and functionality of your jacket, it is important to know how to wash it properly.
Preparing for Washing: The Importance of Getting the Right Approach
Before washing your jacket, you should read the care label.
It indicates the optimal water temperature, type of detergent and washing mode, which depend on the filler. Do not ignore this information.
The first step is to inspect the jacket for stains and heavy dirt.
If there are any, they must first be treated with special stain removers.
This will help avoid re-washing, which can damage the filling and fabric.
Choosing a Detergent
The correct choice of detergent is important to maintain the structure of the filler.
For washing jackets, it is recommended to use liquid detergents, which dissolve better in water and are evenly distributed over the fabric. Special detergents for sportswear and outerwear will be an excellent choice.
Washing mode and water temperature
For jackets, the most suitable washing mode is delicate or hand. These modes provide minimal mechanical impact on the fabric and filler.
The water temperature should be moderate, usually not exceeding 30-40 degrees Celsius. Too hot water can cause the filler to deform and form lumps.
Before loading the jacket into the washing machine, it is recommended to close all zippers and buttons, and turn the garment inside out. This will help prevent damage to the outer fabric and fittings.
Using tennis balls and special balls
To avoid lumps when washing a down jacket, you can use tennis balls or special washing balls.
Place them in the washing machine drum along with the jacket. This will help distribute the filling evenly and prevent it from clumping.
Correct wringing
The jacket should be spun at low speed to avoid excessive stress on the fabric and filling.
High speeds can cause deformation and damage to the product. It is better to choose a mode with a minimum number of revolutions or to skip spinning altogether and let the water drain naturally.
Drying: the key stage
Drying your jacket is no less important than washing it. To avoid lumps, you need to dry the garment properly.
It is recommended to dry the jacket horizontally, laying it on a towel or dryer. This will help to avoid stretching and deformation of the fabric.
Periodically, the jacket needs to be shaken and the filling should be straightened out with your hands to avoid it accumulating in one place.
If possible, use a tumble dryer on low heat and add tennis balls to help smooth out the filling faster and more effectively.
Additional tips for caring for your jacket
To keep your jacket in perfect condition, it is important not only to wash it correctly, but also to follow basic care rules.
Ventilate the product regularly, avoid prolonged exposure to direct sunlight and moisture. Use special storage covers to prevent contamination and damage to the fabric.
If your jacket gets wet, be sure to dry it as soon as possible to avoid mold and unpleasant odors. For down products, it is recommended to have them professionally cleaned periodically to preserve their thermal insulation properties.
Previously, we talked about how to stop being distracted by social networks while working.
