Content
What you shouldn't wash an induction hob with: secrets of proper care for modern equipment
01.09.2024 03:10
An induction hob is an innovative device that requires a special approach to maintenance.
Incorrect cleaning may damage the surface and cause malfunction of the appliance.
It is important to know which products and methods are absolutely not suitable for washing this modern equipment.
Prohibited cleaning products
Abrasive materials
The use of hard sponges, brushes with metal fibers or abrasive powders is not allowed when cleaning the induction hob.
Such products leave scratches on the glass-ceramic surface, damaging its integrity and worsening its appearance.
Over time, minor damage can lead to more serious problems, including reduced heating efficiency.
Aggressive chemicals
Concentrated acids, alkalis and solvents can corrode the protective coating of the plate.
Products containing chlorine, ammonia or acetone may cause discoloration of the surface and damage the electronic components of the device.
The use of such substances is fraught not only with cosmetic defects, but also with disruption of the stove’s operation.
Metal scrapers
The temptation to quickly remove dried dirt with a metal scraper is great, but this method is unacceptable for an induction hob. The sharp edges of the scraper easily leave deep scratches that not only spoil the appearance, but can also cause microcracks in the glass ceramics.
Steam cleaners
Despite their apparent safety, the use of steam cleaners for induction cooktops is not recommended.
High steam temperature and humidity can cause moisture to penetrate into the device, which can lead to short circuits and failure of electronic components.
Proper care of your induction hob
To maintain the functionality and attractive appearance of your induction hob, use only cleaning products specifically designed for it.
Soft sponges, microfiber cloths and non-aggressive cleaning agents are the best choice for regular care.
It is important to remember that cleaning should be done only after the surface has completely cooled down. Warm water with a mild detergent effectively copes with most dirt.
To remove stubborn stains, it is recommended to use special creams or gels for glass ceramics that do not contain abrasive particles.
