Content
No grease or carbon deposits: how to clean a kitchen hood – 4 simple and effective methods
23.02.2024 09:18
Over time, grease and dirt can accumulate on the hood, which will have a negative impact on the operation of the device.
But there are several effective methods that will help you easily restore the cleanliness of your hood and get rid of plaque.
Just first it is important to carry out preliminary preparation and disconnect the hood from the socket.
A remedy with soda
You need to pour ten liters of water into a saucepan and add about half a glass of soda.
Then we heat the water, place the hood filter in it and boil for about half an hour.
Then simply wipe it with a sponge and rinse everything off with water.
It is just important to keep in mind that this method is not suitable for cleaning shiny aluminum grilles.
Dishwashing liquid
This method will work if the hood is cleaned regularly.
Place the filter in a large container, add some dishwashing liquid and fill it with hot water.
Leave it like this for 40 minutes, and then clean it with a hard sponge.
Then the filter must be washed and dried thoroughly before installation.
A product with soda and soap
A piece of laundry soap should be grated and then dissolved in ten liters of water. Then add five tablespoons of soda.
Immerse the filter in this solution, bring to a boil, turn off the heat and leave for 20 minutes.
Eventually the fat will soften and can be easily removed.
Vinegar remedy
The sponge should be soaked in vinegar and wipe all dirty areas with it. Leave it for 30 minutes, then rinse with water.
If the plaque is strong enough, the procedure can be repeated again.
Previously, we wrote about how to pour boiling water into the sink.
